Connect-Tek CTIP-01 Specifications download pdf (Page 7)

Connect-Tek Over IP

d. Click “Advanced… ”, then click “Add… ” to add up the IP address of “192.168.1.124”, and the Subnet

mask of “255.255.255.0”.

Step 3. From that computer, open a web browser and go to https://192.168.1.123. Login using “admin” for

both username and password.

Step 4.Click on the Admin/Setup button then Network configuration (IP address, netmask, gateway).

From here you can set the IP address as needed.

2. If you have DHCP (Dynamic Host Configuration Protocol)

Step 1. Please have your MAC address. You can find it on a white sticker on the bottom of the CTIP-01.

Here is an example, 00-0E-C5-00-08-1A.

Step 2. Power on the CTIP-01 and connected to the network via WAN port on the rear panel. The DHCP will

automatically assign an IP address to the CTIP-01.

Step 3. Access the DHCP log from your file server. A simple DHCP log looks similar to the following:

Step 4. From the above DHCP log, you can easily find the DHCP assigned an IP to the CTIP-01,

192.168.22.4. Once you have located this IP address, do NOT power off the CTIP-01 or your DHCP

server since it might lease a different IP address.

Step 5. Simply open a web browser and type https://192.168.22.4 to access your CTIP-01. Login using

“admin” for both username and password.

3. Using the HyperTerminal via Serial Port

Step 1. Connect the DB9 RS-232 Null Modem cable (optional) to the DTE serial port on the rear panel of

CTIP-01. And, connect the opposite end of the cable to the serial port (COM1, COM2…) of your

computer.

1 2 3 4 5 6 7 8 9 10 11 12 ... 57 58

No comments

Connect-Tek CTIP-01 Specifications Page 7