Connect-Tek Over IP
49
BMC Password: Enter the password twice assigned to the BMC in the host computer’s BIOS setup
software.
NOTE: that the selected baud rate should match the host computer’s setting. Problems with the BMC
password (as well as any other error information) will be recorded in the CTIP-01’s system log on the
Status page of the Web interface. If the host computer’s BIOS setup allows for multiple levels of
security for the BMC, ensure the password you enter on the menu offers sufficient authority to control
chassis power and monitor fan status.
Once you have made the necessary changes on this screen, click Commit to activate IPMI with the settings
you entered. NOTE that clicking Commit will cause any active VNC sessions to fail and you will need to
re-establish them.
Accessing the Status Screen
The CTIP-01 allows you to monitor the status of the host computer via IPMI using either the Web interface or
the VNC client. The information you will be able to view using the status screen will depend on the model of
host computer being managed. Since IPMI implementations vary widely across manufacturers, the
information you are able to see on your status screen may differ from the examples. NOTE that the Status
screen will not allow you to make any configuration changes and is for monitoring purposes only.
To access the Status (IPMI Sensor Report) screen:
• From the Web interface: click View IMPI sensor report next to the thumbnail image on the Home screen
• From the VNC interface: click IMPI from the Bribar at the bottom of the VNC window
Examples:
Accessing IPMI Controls
There are two ways to access power controls for the managed computer. The first is through the Home
screen on the Web interface. The second is through the Bribar during an active VNC session.
Web Status Report
VNC Status Report
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals