Connect-Tek CTIP-01 Specifications download pdf (Page 5)

Connect-Tek Over IP

▓ Chapter 2 Your First-Time on CTIP-01

A. Quick Start Guide

For this Quick Start Guide, we offer three different easy step-by-step ways, letting you setup this unit very

easily and quickly.

Before doing the initial setting:

• Please record your original computer settings such as TCP/IP setting in case you would like to

have this computer for other use.

• Please make sure the latest Java software downloaded at http://www.java.com.

• Please disable mouse acceleration on the host Computer and client computer, refer to more

detailed information in Section C of Chapter 2.

Hardware Necessary for this Quick Start Guide

• A CTIP-01 unit with a power adapter

• A hub with a power adapter

• A computer with a keyboard, mouse, and monitor

• 2 CAT-5 cables with RJ-45 connectors

• A DB9 RS-232 null modem cable or a DB9 RS-232 straight-through cable

1. If you don’t have DHCP (Dynamic Host Configuration Protocol)

Step 1. Connect the CAT-5 cable to the WAN port on the rear panel of CTIP-01. And, connect the opposite

end of the CAT-5 cable to the hub. Another CAT-5 cable connects the hub with the computer.

Step 2. Set the IP address of a computer connected on the same network as CTIP-01 to a similar unused

address like 192.168.1.124 and the subnet mask of 255.255.255.0.

Under Windows XP Environment

a. Click “Start”, then right click on “My Network Places”, and then select “Properties”. You will get the

following screen:

1 2 3 4 5 6 7 8 9 10 ... 57 58

No comments

Connect-Tek CTIP-01 Specifications Page 5