Connect-Tek CTIP-01 Specifications download pdf (Page 27)

Connect-Tek Over IP

• Disconnect all VNC users: in this case the users are locked-out of the system because someone has left

a VNC session connected and cannot be reached through other means, the admin user can close all

VNC connections.

VIII. How to Setup the SNMP Agent and Configuration

As you get the Admin/Setup screen, please click on SNMP agent setup and configuration

This menu allows you to configure the CTIP-01 so it can be recognized and managed by using

industry-standard Simple Network Management Protocol software.

IX. How to Setup RADIUS authentication

As you get the Admin/Setup screen, please click on RADIUS authentication setup

The RADIUS server requires the IP

address, the UDP port number

(1812 - default or 1645) and the

shared secret. The shared secret is

used to encrypt communications

and corresponds to a shared

password for the RADIUS server

and the client machine. Two

additional servers may be defined

for backup purposes. Each server

will be tried in order, using the

indicated number of retries and

timeout period, which are

configurable on the same page.

Remember to enable RADIUS after

configuring it. While RADIUS

authentication is enabled, the locally defined accounts on the Connect-Tek over IP module will not be used,

except for the SSH login. However, if a user name of the form “name.local” is given at the RADIUS prompt,

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 57 58

No comments

Connect-Tek CTIP-01 Specifications Page 27