Connect-Tek Over IP
17
III. Connect to the KVM Switch
If needed, the CTIP-01 can be run through a typical KVM switch like any other computer. Using a KVM cable,
you can connect the Host Keyboard Port, Host Mouse Port, and Video (In) Port of CTIP-01 with the
“console” connectors on a KVM switch. The steps are shown as following:
1. Connect the Host Keyboard Port of CTIP-01 to the keyboard port of the console on the KVM switch.
2. Connect the Host Mouse Port of CTIP-01 to the mouse port of the console on the
KVM switch.
3. Connect the Video (In) Port of CTIP-01 to the video port of the console on the KVM switch.
4. Use the CAT-5 Ethernet cable to connect the LAN port of CTIP-01 with a network data jack such as the
hub, switch, router, pre-wired wall jack, and so on.
5. (Optional) If you would like to connect the WAN port of CTIP-01 as well, please apply step 3 on the WAN
port.
6. Connect the power cord (included) into an appropriate electrical outlet; plug the opposite end of the
power cord into the AC/DC power adapter, then plug the power connector into the DC-in port of CTIP-01.
The LED underneath the power connectors will be solid green when the CTIP-01 is powered.
7. (Optional) if you would like to add power redundancy to the CTIP-01, simply connect the optional second
AC/DC power adapter to the Spare port of CTIP-01. This provides a load-balancing feature between the
two power sources and allows the CTIP-01 to function if one adapter fails.
8. Power on the CTIP-01 and KVM switch.
E. Access your CTIP-01 and Remote Control the Host Computer
As soon as you finish the above initial settings and connections, congratulations! You are ready to enjoy
remote control the host computer from any corner around the whole world!
Simply open up the web browser and type the IP you setup in the initial settings, and then type the right
username and password. That's it! You’re ready to access your CTIP-01!
As you login the CTIP-01 with the right username and password, you will get the following screen:
Please simply double click on the
small square window in the middle
of the screen. You’ll get the VNC
screen.( You may need to
upgrade or download your Java
support in your browser before
using the VNC screen to remote
control the host computer;
however, most modern browsers
come with a version of Java that is
compatible with this application.)
That is, you will see the screen of
the host computer. Now, you can
fully control the host computer
remotely like you are present at
the host computer location
physically, sitting in front of the
host computer! Likewise, if you
would like to log out your CTIP-01,
please simply click on the icon of “Logout” on the top of screen!
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals