Connect-Tek CTIP-01 Specifications download pdf (Page 57)

Connect-Tek Over IP

Modem hang up. Resetting

The connection has been closed or terminated unexpectedly.

Timeout during login process. Giving up

The PPP client connecting over the modem has waited too long to complete the authentication process or

supplied an invalid user name and/or password.

Modem init chat script failed

The modem did not respond to the initialization string from the CTIP-01. You may need to change the init

string or verify the cabling and modem status.

Modem init okay

The modem has responded appropriately to the init string.

Saw PPP startup from client

A PPP authentication has occurred and a session has started.

Phone line rings!

An incoming call has been detected by the modem.

Modem answers: xxxxxxxxx

The connection speed and protocol used for a connection, as reported by the modem. The exact contents of

the message will vary depending on the modem make and model.

Appendix F The Installation of Optional CTIP -01 Rack Mounting

Bracket: RACKMT-IP

A special bracket is available for the rack-mounting CTIP-01. It allows rack mounting in two different

orientations ---horizontally and vertically as shown as Figure 1 and Figure 2 respectively. There is also a

rack-shelf available that mounts two CTIP-01 systems into 1U of space.

Note: If you would like to install one CTIP-01 horizontally on

the rack, 2 brackets are necessary, please refer to Figure 1

as well.

Figure 1 Figure 2

1 2 ... 52 53 54 55 56 57 58

No comments

Connect-Tek CTIP-01 Specifications Page 57