Connect-Tek Over IP
16
Note: All of the above devices are not included except the CTIP-01, one adapter, and one 3-in-1 KVM PS/2
cable. And, the Power Bar, Mini-USB to USB cable, Serial Supervisor, and Modem device are optional.
I. Connect to the Host Computer
a. If your host computer uses the PS/2 keyboard and mouse, please follow the instructions below:
1. Turn off your host computer and leave your CTIP-01 powered down. If you purchase CTIP-01 Rack
Mounting Bracket (optional), please install it with CTIP-01 on your rack or cabinet.
2. Use 3-in-1 KVM PS/2 cable (included) to connect the Host Keyboard, Host Mouse, Video (IN) of
CTIP-01 with the PS/2 keyboard port, PS/2 mouse port, video port of your host computer.
3. Use the CAT-5 Ethernet cable to connect the LAN port of CTIP-01 with a network data jack such as the
hub, switch, router, pre-wired wall jack, and so on.
4. (Optional) If you would like to connect the WAN port of CTIP-01 as well, please apply step 3 on the WAN
port.
5. Connect the power cord (included) into an appropriate electrical outlet; plug the opposite end of the
power cord into the AC/DC adapter, then plug the power connector into the DC-in port of CTIP-01. The
LED underneath the power connectors will be solid green when the CTIP-01 is powered.
6. (Optional) If you would like to add power redundancy to the CTIP-01, simply connect the optional second
AC/DC adapter to the Spare port of CTIP-01. This provides a load-balancing feature between the two
power sources and allows the CTIP-01 to function if one adapter fails.
7. Turn on your host computer.
b. If your host computer uses the USB keyboard and mouse, please follow the instructions below:
1. Turn off your host computer and leave your CTIP-01 powered down. If you purchase CTIP-01 Rack
Mounting Bracket (optional), please install it with CTIP-01 on your rack or cabinet. NOTE: The CTIP-01 is
convection-cooled. Ensure the vents on both sides are unobstructed.
2. Use the HDB-15 VGA cable to connect the Video (IN) port of CTIP-01 with the video port of your host
computer.
3. Use the USB Type A to 5-pin mini-B cable (not included) to connect the mini USB port of CTIP-01 with
an available USB port on the host computer. This mini USB can emulate the keyboard and mouse. In the
event that you do not have enough integrated USB ports on the host computer to directly connect the
keyboard, mouse, and CTIP-01, you may use a high-quality USB hub on one of the computer’s USB ports
to make all of the connections.
4. Use the CAT-5 Ethernet cable to connect the LAN port of CTIP-01 with a network data jack such as the
hub, switch, router, pre-wired wall jack, and so on.
5. (Optional) If you would like to connect the WAN port of CTIP-01 as well, please apply step 3 on the WAN
port.
6. Connect the power cord (included) into an appropriate electrical outlet; plug the opposite end of the
power cord into the AC/DC power adapter, then plug the power connector into the DC-in port of CTIP-01.
The LED underneath the power connectors will be solid green when the CTIP-01 is powered.
7. (Optional) if you would like to add power redundancy to the CTIP-01, simply connect the optional second
AC/DC power adapter to the Spare port of CTIP-01. This provides a load-balancing feature between the
two power sources and allows the CTIP-01 to function if one adapter fails.
8. Turn on your host computer.
II. Connect to the Local Keyboard, Mouse, and Monitor
The CTIP-01 offers the Local Keyboard Port, Local Mouse Port, and Video (Out) (local monitor) Port,
allowing the user to connect a keyboard, mouse, and a monitor for maintenance and monitoring locally. This
allows a user to physically use the host computer as through the CTIP-01 were transparent.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals